This fixes a mistake in allowing a `WebAssembly.Module` to be passed to
the initialization function in `--no-modules` mode by ensuring that it
resolves to a map of an instance/module instead of just resolving to an
instance.
This commit adds a `--remove-name-section` flag to the `wasm-bindgen`
command which will remove the `name` section of the wasm file, used to
indicate the names of functions typically used in debugging. This flag
is off-by-default and will primarily be controlled by wasm-pack,
typically being passed by default with `wasm-pack build --release`.
Closes#1021
This commit switches all imports of JS methods to `structural` by
default. Proposed in [RFC 5] this should increase the performance of
bindings today while also providing future-proofing for possible
confusion with the recent addition of the `Deref` trait for all imported
types by default as well.
A new attribute, `host_binding`, is introduced in this PR as well to
recover the old behavior of binding directly to an imported function
which will one day be the precise function on the prototype. Eventually
`web-sys` will switcsh over entirely to being driven via `host_binding`
methods, but for now it's been measured to be not quite as fast so we're
not making that switch yet.
Note that `host_binding` differs from the proposed name of `final` due
to the controversy, and its hoped that `host_binding` is a good
middle-ground!
[RFC 5]: https://rustwasm.github.io/rfcs/005-structural-and-deref.html
This commit removes shims, where possible, for `structural` items.
Instead of generating code that looks like:
const target = function() { this.foo(); };
exports.__wbg_thing = function(a) { target.call(getObject(a)); };
we now instead generate:
exports.__wbg_thing = function(a) { getObject(a).foo(); };
Note that this only applies to `structural` bindings, all default
bindings (as of this commit) are still using imported targets to ensure
that their binding can't change after instantiation.
This change was [detailed in RFC #5][link] as an important optimization
for `structural` bindings to ensure they've got performance parity with
today's non-`structural` default bindings.
[link]: https://rustwasm.github.io/rfcs/005-structural-and-deref.html#why-is-it-ok-to-make-structural-the-default
Previously `arguments` was used to pass around an array of arguments,
but this wasn't actually a `js_sys::Array` but rather a somewhat
esoteric internal object. When switching over `Array` methods to be
`structural` this caused issues because the inherent methods on an
`arguments` object were different than that of `js_sys::Array`.
This commit implements the first half of [RFC #5] where the `Deref`
trait is implemented for all imported types. The target of `Deref` is
either the first entry of the list of `extends` attribute or `JsValue`.
All examples using `.as_ref()` with various `web-sys` types have been
updated to the more ergonomic deref casts now. Additionally the
`web-sys` generation of the `extends` array has been fixed slightly to
explicitly list implementatoins in the hierarchy order to ensure the
correct target for `Deref` is chosen.
[RFC #5]: https://github.com/rustwasm/rfcs/blob/master/text/005-structural-and-deref.md
For example, the constructor in Response.webidl accepts multiple types. However, one of those types is `ReadableStream` which isn't defined yet, and that causes all constructors for Response to be skipped even though the other argument types could be supported.
This commit makes the `to_idl_type` infallible, returning a new enum
variant, `UnknownInterface`, in the one location that we still return
`None`. By making this infallible we can ensure that expansion of unions
which have unknown types still generate methods for all the variants
which we actually have all the methods for!
This commit adds a test harness and the beginnings of a test suite for
the crate that performs GC over a wasm module. This crate historically
has had zero tests because it was thought that it would no longer be
used once LLD landed with `--gc-sections`, but `wasm-bindgen` has come
to rely more and more on `wasm-gc` for various purposes.
The last release of `wasm-bindgen` was also released with a bug in the
recently refactored support in the `wasm-gc` crate, providing a perfect
time and motivation to start writing some tests!
All tests added here are `*.wat` files which contain the expected output
after the gc pass is executed. Tests are automatically updated with
`BLESS_TESTS=1` in the environment, which is the expected way to
generate the output for each test.
This commit updates the `wasm-gc` pass of wasm-bindgen to eliminate
duplicate types in the type section, effectively enabling a gc of the
type section itself. The main purpose here is ensure that code generated
by `wasm-bindgen` itself doesn't have to go too far out of its way to
deduplicate at generation time, but rather it can rely on the gc pass to
clean up.
Note that this currently depends on paritytech/parity-wasm#231, but this
can be updated if that ends up not landing.
This commit adds support for running a gc pass over locals in a
function. This will remove dead local declarations for a function
(completely unused) as well as compact existing entries to ensure that
we don't have two local declarations of the same type.
While this was initially intended for some future support of emitting
shims in `wasm-bindgen`, it turns out this pass is firing quite a lot
over existing functions generated by LLVM. Looks like we may see benefit
from this today with slightly smaller wasm binaries!
These don't seem to be widely used and they're not needed by
wasm-bindgen itself, so let's remove the symbols by default and
optionally in the future we can add an option to retain them.
This commit restructures some of the internals of `wasm-gc` now that
I've actually got a better grasp on the wasm format and what all the
ownership edges look like. This shouldn't actually result in any
user-facing changes, but should make us be a bit more compatible with
operations in the future.
Memories/tables/elements/segments are no longer considered automatic
roots but rather need to be rooted by something else to prevent a gc.
For example an element section is gc'd along with a table if the table
is never referenced, along with data segments as well if the memory
isn't referenced.
Additionally all index sets now don't contained offseted indices, but
rather everything is always stored relative to the "index space" to
ensure consistency.
This should make it a bit easier to add future items to gc!
Previously whenever a future readiness notification came in we would
immediately start polling a future. This ends up having two downsides,
however:
* First, the stack depth may run a risk of getting blown. There's no
recursion limit to defer execution to later, which means that if
futures are always ready we'll keep making the stack deeper.
* Second, and more worrisome in the near term, apparently future
adapaters in the `futures` crate (namely the unsync oneshot channel)
doesn't actually work if you immediately poll on readiness. This may
or may not be a bug in the `futures` crate but it's good to fix it
here anyway.
As a result whenever a future is ready to get polled again we defer its
polling to the next turn of the event loop. This should ensure that the
current call stack is always drained and we're effectively enqueueing
the future to be polled in the near future.
... and add a parallel raytracing demo!
This commit adds enough support to `wasm-bindgen` to produce a workable
wasm binary *today* with the experimental WebAssembly threads support
implemented in Firefox Nightly. I've tried to comment what's going on in
the commits and such, but at a high level the changes made here are:
* A new transformation, living in a new `wasm-bindgen-threads-xform`
crate, prepares a wasm module for parallel execution. This performs a
number of mundane tasks which I hope to detail in a blog post later on.
* The `--no-modules` output is enhanced with more support for when
shared memory is enabled, allowing passing in the module/memory to
initialize the wasm instance on multiple threads (sharing both module
and memory).
* The `wasm-bindgen` crate now offers the ability, in `--no-modules`
mode, to get a handle on the `WebAssembly.Module` instance.
* The example itself requires Xargo to recompile the standard library
with atomics and an experimental feature enabled. Afterwards it
experimentally also enables threading support in wasm-bindgen.
I've also added hopefully enough CI support to compile this example in a
builder so we can upload it and poke around live online. I hope to
detail more about the technical details here in a blog post soon as
well!
This shaves a little over 2MB off the download locally for Linux,
removing debuginfo (which no one's probably gonna use anyway) as well as
switching from jemalloc to the system allocator.
I've noticed this in a few cases where it's sometimes easy to have a
`WebAssembly.Module` on-hand for the `--no-modules` mode where you don't
want to necessarily `fetch`. This commit changes the exported
initialization function in `--no-modules` mode to support both!
This commit migrates away from using Serde for the custom section in
wasm executables. This is a refactoring of a purely-internal data
structure to `wasm-bindgen` and should have no visible functional change
on users.
The motivation for this commit is two fold:
* First, the compile times using `serde_json` and `serde_derive` for the
syntax extension isn't the most fun.
* Second, eventually we're going to want to stablize the layout of the
custom section, and it's highly unlikely to be json!
Primarily, though, the intention of this commit is to improve the
cold-cache compile time of `wasm-bindgen` by ensuring that for new users
this project builds as quickly as possible. By removing some heavyweight
dependencies from the procedural macro, `serde`, `serde_derive`, and
`serde_json`, we're able to get a pretty nice build time improvement for
the `wasm-bindgen` crate itself:
| | single-core build | parallel build |
|-------------|-------------------|----------------|
| master | 36.5s | 17.3s |
| this commit | 20.5s | 11.8s |
These are't really end-all-be-all wins but they're much better
especially on the spectrum of weaker CPUs (in theory modeled by the
single-core case showing we have 42% less CPU work in theory).
This commit fixes instantiation of the wasm module even if some of the
improted APIs don't exist. This extends the functionality initially
added in #409 to attempt to gracefully allow importing values from the
environment which don't actually exist in all contexts. In addition to
nonexistent methods being handled now entire nonexistent types are now
also handled.
I suspect that eventually we'll add a CLI flag to `wasm-bindgen` to say
"I assert everything exists, don't check it" to trim out the extra JS
glue generated here. In the meantime though this'll pave the way for a
wasm-bindgen shim to be instantiated in both a web worker and the main
thread, while using DOM-like APIs only on the main thread.