This commit migrates all non-mutable slices incoming into Rust to use
the standard `AllocCopy` binding instead of using a custom `Slice`
binding defined by `wasm-bindgen`. This is done by freeing the memory
from Rust rather than freeing the memory from JS. We can't do this for
mutable slices yet but otherwise this should be working well!
After a module goes through its primary GC pass we need to look over the
set of remaining imports and use that to prune the set of imports that
we're binding.
Closes#1613
This commit is the second, and hopefully last massive, refactor for
using WebIDL bindings internally in `wasm-bindgen`. This commit actually
fully executes on the task at hand, moving `wasm-bindgen` to internally
using WebIDL bindings throughout its code generation, anyref passes,
etc. This actually fixes a number of issues that have existed in the
anyref pass for some time now!
The main changes here are to basically remove the usage of `Descriptor`
from generating JS bindings. Instead two new types are introduced:
`NonstandardIncoming` and `NonstandardOutgoing` which are bindings lists
used for incoming/outgoing bindings. These mirror the standard
terminology and literally have variants which are the standard values.
All `Descriptor` types are now mapped into lists of incoming/outgoing
bindings and used for process in wasm-bindgen. All JS generation has
been refactored and updated to now process these lists of bindings
instead of the previous `Descriptor`.
In other words this commit takes `js2rust.rs` and `rust2js.rs` and first
splits them in two. Interpretation of `Descriptor` and what to do for
conversions is in the binding selection modules. The actual generation
of JS from the binding selection is now performed by `incoming.rs` and
`outgoing.rs`. To boot this also deduplicates all the code between the
argument handling of `js2rust.rs` and return value handling of
`rust2js.rs`. This means that to implement a new binding you only need
to implement it one place and it's implemented for free in the other!
This commit is not the end of the story though. I would like to add a
mdoe to `wasm-bindgen` that literally emits a WebIDL bindings section.
That's left for a third (and hopefully final) refactoring which is also
intended to optimize generated JS for bindings.
This commit currently loses the optimization where an imported is hooked
up by value directly whenever a shim isn't needed. It's planned that
the next refactoring to emit a webidl binding section that can be added
back in. It shouldn't be too too hard hopefully since all the
scaffolding is in place now.
cc #1524
Recent refactorings of wasm-bindgen have inserted multiple `gc` passes
executed by walrus. In these passes though the function table was being
removed a bit too aggressively because it's not exported by LLD and it's
only later that we realize we need to export it.
To handle this case we add synthetic and temporary exports of the
function table and these exports are removed just after the GC pass in
question.
Closes#1603
Commit 8ace8287ff75214fe955bb1819df9e8aa216d325 made the argument to the
generated init() function optional (when the target is "web"), but it is still
marked as required in the generated .d.ts file.
Fix the generated declaration to match the function definition again.
Previously a `Function` didn't actually take into account the self
pointer and instead left it as an implicit argument. This instead
ensures that there's a `Descriptor::I32` type inside of a `Function`
description that we have to later skip, and this should not only make
the anyref pass correct for Rust exports but it should also make it more
accurate for future webidl transformations.
While this doesn't currently cause issues in the upcoming webidl
refactor this is actually being asserted and causes verification issues
if the types don't align!
These are basically just mistakes from the original implementation of
this module, but this doesn't actually fix a known bug today.
This is just a bit too general to work with and is pretty funky. Instead
just tweak `Clamped<&[u8]>` to naturally generate a descriptor for
`Ref(Slice(ClampedU8))`, requiring fewer gymnastics when interpreting
descriptors.
Instead of allocating space on the stack and returning a pointer we
should be able to use a single global memory location to communicate
this error payload information. This shouldn't run into any reentrancy
issues since it's only stored just before returning to wasm and it's
always read just after returning from wasm.
This was once required due to flavorful management of the `WeakRef`
proposal but nowadays it's simple enough that we don't need to refactor
it out here.
Iteration order of hash maps is nondeterministic, so add a `sorted_iter`
function and then use that throughout whenever iteration order of a hash
map would affect the generated JS.
This allows using WebIDL bindings types to describe both of them instead
of having a custom ABI, allowing for more direct and rich bindings
eventually!
* Catch all closures by walking all `Descriptor` values and looking for
either `Function` or `Closure`.
* Update the correct arguments for wasm by ensuring that the closure
modifications skip the first two arguments.
This commit reimplements the `anyref` transformation pass tasked with
taking raw rustc output and enhancing the module to use `anyref`. This
was disabled in the previous commits during refactoring, and now the
pass is re-enabled in the manner originally intended.
Instead of being tangled up in the `js/mod.rs` pass, the anyref
transformation now happens locally within one module,
`cli-support/src/anyref.rs`, which exclusively uses the output of the
`webidl` module which produces a WebIDL bindings section as well as an
auxiliary wasm-bindgen specific section. This makes the anyref transform
much more straightforward and local, ensuring that it doesn't propagate
elsewhere and can be a largely local concern during the transformation.
The main addition needed to support this pass was detailed knowledge of
the ABI of a `Descriptor`. This knowledge is already implicitly
hardcoded in `js2rust.rs` and `rust2js.rs` through the ABI shims
generated. This was previously used for the anyref transformation to
piggy-back what was already there, but as a separate pass we are unable
to reuse the knowledge in the binding generator.
Instead `Descriptor` now has two dedicated methods describing the
various ABI properties of a type. This is then asserted to be correct
(all the time) when processing bindings, ensuring that the two are kept
in sync.
This is no longe rneeded now that we precisely track what needs to be
exported for an imported item, so all the imports are hooked up
correctly elsewhere without the need for the `__exports` map.
This commit starts the `wasm-bindgen` CLI tool down the road to being a
true polyfill for WebIDL bindings. This refactor is probably the first
of a few, but is hopefully the largest and most sprawling and everything
will be a bit more targeted from here on out.
The goal of this refactoring is to separate out the massive
`crates/cli-support/src/js/mod.rs` into a number of separate pieces of
functionality. It currently takes care of basically everything
including:
* Binding intrinsics
* Handling anyref transformations
* Generating all JS for imports/exports
* All the logic for how to import and how to name imports
* Execution and management of wasm-bindgen closures
Many of these are separable concerns and most overlap with WebIDL
bindings. The internal refactoring here is intended to make it more
clear who's responsible for what as well as making some existing
operations much more straightforward. At a high-level, the following
changes are done:
1. A `src/webidl.rs` module is introduced. The purpose of this module is
to take all of the raw wasm-bindgen custom sections from the module
and transform them into a WebIDL bindings section.
This module has a placeholder `WebidlCustomSection` which is nowhere
near the actual custom section but if you squint is in theory very
similar. It's hoped that this will eventually become the true WebIDL
custom section, currently being developed in an external crate.
Currently, however, the WebIDL bindings custom section only covers a
subset of the functionality we export to wasm-bindgen users. To avoid
leaving them high and dry this module also contains an auxiliary
custom section named `WasmBindgenAux`. This custom section isn't
intended to have a binary format, but is intended to represent a
theoretical custom section necessary to couple with WebIDL bindings to
achieve all our desired functionality in `wasm-bindgen`. It'll never
be standardized, but it'll also never be serialized :)
2. The `src/webidl.rs` module now takes over quite a bit of
functionality from `src/js/mod.rs`. Namely it handles synthesis of an
`export_map` and an `import_map` mapping export/import IDs to exactly
what's expected to be hooked up there. This does not include type
information (as that's in the bindings section) but rather includes
things like "this is the method of class A" or "this import is from
module `foo`" and things like that. These could arguably be subsumed
by future JS features as well, but that's for another time!
3. All handling of wasm-bindgen "descriptor functions" now happens in a
dedicated `src/descriptors.rs` module. The output of this module is
its own custom section (intended to be immediately consumed by the
WebIDL module) which is in theory what we want to ourselves emit one
day but rustc isn't capable of doing so right now.
4. Invocations and generations of imports are completely overhauled.
Using the `import_map` generated in the WebIDL step all imports are
now handled much more precisely in one location rather than
haphazardly throughout the module. This means we have precise
information about each import of the module and we only modify
exactly what we're looking at. This also vastly simplifies intrinsic
generation since it's all simply a codegen part of the `rust2js.rs`
module now.
5. Handling of direct imports which don't have a JS shim generated is
slightly different from before and is intended to be
future-compatible with WebIDL bindings in its full glory, but we'll
need to update it to handle cases for constructors and method calls
eventually as well.
6. Intrinsic definitions now live in their own file (`src/intrinsic.rs`)
and have a separated definition for their symbol name and signature.
The actual implementation of each intrinsic lives in `rust2js.rs`
There's a number of TODO items to finish before this merges. This
includes reimplementing the anyref pass and actually implementing import
maps for other targets. Those will come soon in follow-up commits, but
the entire `tests/wasm/main.rs` suite is currently passing and this
seems like a good checkpoint.
